I would like to connect my appliances to a 110V installation

I would like to connect my appliances to a 110V installation

- P1 retro, P2 Hexaline, P3 PIX3L must be powered by 200-240 V and 50/60 Hz frequency.
The automatically detects the AC frequency. 
To use P1 retro, P2 hexaline, P3 PIX3L in the US market, you need a transformer to change the voltage from 110/125 V to 200-240 V. 

- P1 mini, MANTIS, S-TRIBE, P1 EVO, P2 EVO, P3 EVO, EVO ELEMENT, AMULET you can use with 110V installation without transformers.

    • Related Articles

    • Fan installation [P1 EVO]

      Tools needed for installation: set of fans with brackets, universal pliers narrow, 2.5mm Allen spanner, 2mm Allen spanner, silicone washers. Preparation for installation: Place the P1EVO on the service table with the pixels facing downwards. Unscrew ...

    • W-DMX installation [MANTIS, S-TRIBE, P1 EVO, P2 EVO, P3 EVO, EVO ELEMENT, AMULET]

      Check if you have all parts required for installation. Portman W-DMX KIT contains : Antena W-DMX PCB Connecting wire 2 x M2,5 Screw with countersunk head (black) 2 x M2,5 Washer 2 x M2,5 Nut Proper for installation: You need Electronics Box Cover ...

    • W-DMX installation [P1 retro, P2 hexaline, P3 PIX3L, P1 mini]

      Check if you have all parts required for installation. Portman W-DMX KIT contains : Antena W-DMX PCB Connecting wire 2 x M2,5 Screw with countersunk head (black) 2 x M2,5 Washer 2 x M2,5 Nut 2 x M4 Toothed washer 1 x M4 Nut 1 x Plastic Cap (black) ...

    • Ferrite installation [S-TRIBE]

      PREPARE: 2mm Allen wrench Ferrite. FERRITE INSTALLATION: PUT THE DEVICE WITH THE COVER OF THE ELECTRONICS BOX UPWARDS. USING A 2MM ALLEN WRENCH, UNSCREW THE ELECTRONICS COVER. REMOVE THE ELECTRONICS COVER. UNPLUG THE LDB-LPU CABLE FROM THE SOCKET IN ...

    • Firmware Update Manual [MANTIS, S-TRIBE, P1 EVO, P2 EVO, P3 EVO, EVO ELEMENT, AMULET]

      To update You need: DMX wires Portman Updater Box (contact your local distributor) Latest software Steps: Download firmware Copy the unzipped .rud files to the SD card to AL-RDM folder. (If you have downloaded the whole AL-RDM folder please just copy ...