Change Log [AMULET]

Change Log [AMULET]

We have recently fixed:

A-35548When Amulet is turned off and on from the power supply- the device should remember the last Manual combination for main source, glow and macro. Currently, these settings reset themselves.
A-65000Turning off the display light is inconsistent with the set time:
- in the menu 10 seconds-actually 20 seconds
- in the menu 30 seconds-actually 1 minute
- in the menu 60 seconds0actually 20 seconds -
A-4512In Standard, Standard Fine, Pixel, Pixel Mode,
with all Glow on full power - when going in the strobe function from dmx value 9 to 10. all sources do not fade at once only in different order.
A-80414With the orientation of the device in the "▼" position on the screen, the arrow should point to the current first pixel. In the picture I show the wrong pointing. It should be in the opposite direction

We are working on:

MENU 2.0

    • Related Articles

    • User Manual [AMULET]

      WELCOME Dear User, Thank you for choosing Portman AMULET™ – the original product with a registered design. We are proud to deliver you the highest quality, greatest design and real passion with our product. Each fixture in the Portman portfolio is ...

    • Change Log [P1 EVO]

      We have recently fixed: P1E-358 Buttons when DMX connected and screen blanked out glow blue and should glow white P1E-7531 Doesn't memorize "Macro Speed" When the power is turned off and on, "Macro Speed" changes to "001%" and it should be the ...

    • Change Log [S-TRIBE]

      We have recently fixed: S-4353 error in message after W-DMX vaporization should be "SUCCESSFULL" S-7312 No stopping scrolling after reaching the maximum address or 1, transition should be after the second press of the button S-8183 G5 mode is missing ...

    • Change Log [P2 EVO]

      We have recently fixed: P2E-5365 error in message after W-DMX vaporization should be "SUCCESSFULL" P2E-2968 The second P2 EVO in Slave mode does not receive the signal from the first one in Master mode when Macro is triggered. P2E-126 No stopping ...

    • DMX CHART [AMULET]

      PIXEL ORDER DMX MODES Mode Super Simple DMX CH Parameter Description 1. Intensity Main Source Ch.1 Pixel 1 HaloLED 8 bit dimmer 0 – 100% 2. Intensity Main Source Ch.2 Pixel 2 HaloLED 8 bit dimmer 0 – 100% 3. Intensity Main Source Ch.3 Pixel 3 HaloLED ...