| EE-2846 | Incorrectly displayed number of hours of operation of the device. |
| EE-7342 | In Slave Mode, with DMX INPUT W-DMX and unpaired W-DMX- it displays incorrectly. It should read "NO WDMX" |
| EE-2918 | In the absence of an active WDMX signal. When the screen goes blank, with "SLAVE" mode, the buttons should glow green all the time |
| EE-7688 | "After selecting the appropriate mode, the DMX address range should change, for: - Super Simple- DMX range should be from 1 to 504 - Simple- DMX range should be from 1 to 498 - Standard- DMX range should be from 1 to 490 - Standard Fine- DMX range should be from 1 to 474 - Pixel- DMX range should be from 1 to 491 - Pixel Fine- DMX range should be from 1 to 476. Stopping the scrolling should be done when the maximum address appropriate for the MODE is reached." |
| EE-417 | With Macro setting from Manual: Macro: 46 Speed: 20% Intensity: 000% A sequence appears that should not be there. |
| EE-2414 | When the power is turned off and on, it should not remember the Intensity 100% values in Main Source and Main Glow |
| EE-6162 | There should be different frequencies in Flicker Mode: Flicker mode 1: 2.8K Flicker mode 2: 5.4 Flicker mode 3: 10K |
| EE-3417 | In WDMX "SIGNAL STRENGTH when there is no antenna and a large distance from the WDMX transmitter, "WEAK" does not show up. |