| P1E-358 | Buttons when DMX connected and screen blanked out glow blue and should glow white |
| P1E-7531 | Doesn't memorize "Macro Speed" When the power is turned off and on, "Macro Speed" changes to "001%" and it should be the previously set value |
| P1E-5240 | Reset All To Default does not reset the macro settings; macro number, speed, intensity. After "Reset All To Default" it should be: "Macro OFF", "Sped 000", "Intenisty 000%". |
| P1E-8957 | After selecting the appropriate mode, the DMX address range should change, for: - Super Simple- DMX range should be from 1 to 500 - Simple- DMX range should be from 1 to 494 - Standard- DMX range should be from 1 to 470 - Standard Fine- DMX range should be from 1 to 434 - Pixel- DMX range should be from 1 to 471 - Pixel Fine- DMX range should be from 1 to 436. Stopping the scrolling should be done when the maximum address appropriate for the MODE is reached. |
| P1E-7742 | Flicker mode 1 should have a frequency of 2.8K, flicker mode 2- a frequency of 5.4K, flicker mode 3- a frequency of 10K |
| P1E-7823 | After setting the screen off time after 60 seconds- screen turns off after 15 seconds. It should be 60 seconds |
| P1E-804 | In Standard Mode, the Randome Strobe function for Halo Led- 7 pixel very rarely lights up |
| P1E-8535 | In Standard Mode after DMX, the randome strobe function is not random enough in GLOW, most sources light up at the same time. Very rarely does the GLOW feature light up in the pixel 7 as well. |
| P1E-4291 | Flicker frequency varies depending on the intensity of the dmx channel for different mode configurations and dimming curve. Everywhere should be 2.8kHz frequency from 0-255 intensity Marked in green are correct, in red not correct: DMX/ STANDARD FINE/ LINEAR/ FLICKER MODE 1/ INTENSITY: 0-13 (flicker frequency 14062Hz), 14-255 (flicker frequency: 2812 Hz) DMX/ PIXEL FINE/ LINEAR/ FLICKER MODE 1/ INTENSITY: 0-13 (flicker frequency 14062Hz), 14-255 (flicker frequency: 2812 Hz) DMX/ STANDARD/ LOG/ FLICKER MODE 1/ INTENSITY: 0-22 (flicker frequency 14062Hz), 23-255 (flicker frequency: 2812 Hz) DMX/ SUPER SIMPLE/ LOG/ FLICKER MODE 1/ INTENSITY: 0-22 (flicker frequency 14062Hz), 23-255 (flicker frequency: 2812 Hz) DMX/ SIMPLE/ LOG/ FLICKER MODE 1/ INTENSITY: 0-22 (flicker frequency 14062Hz), 23-255 (flicker frequency: 2812 Hz) DMX/ PIXEL/ LOG/ FLICKER MODE 1/ INTENSITY: 0-22 (flicker frequency 14062Hz), 23-255 (flicker frequency: 2812 Hz) |
| P1E-8158 | In Standard Fine Mode, the Randome Strobe function for GLOW- 7 pixel very rarely lights up |
| P1E-6425-A/B | Macro is not correctly displayed on the device. Each sequence depending on the change of macro speed has double strobing effects applied. |
| P1E-7469 | "Turning off the display light is inconsistent with the set time: - in the menu 10 seconds-actually 30 seconds - in the menu 30 seconds-actually 1 minute - in the menu 60 seconds0actually 30 seconds -" |
| P1E-3503 | When the screen goes blank, when the dmx is active- the buttons should be white and they have green. |
| P1E-6422 | Macro in Pixel Fine mode is in a different order and should be the same as in Pixel, Standard, Standard Fine, Simple. |