| P2E-5365 | error in message after W-DMX vaporization should be "SUCCESSFULL" |
| P2E-2968 | The second P2 EVO in Slave mode does not receive the signal from the first one in Master mode when Macro is triggered. |
| P2E-126 | No stopping scrolling after reaching the maximum address or 1, transition should be after the second press of the button |
| P2E-1149 | The "Orientation" menu window is missing a space ; it should be "UPSIDE DOWN" |
| P2E-6275 | FLICKERING:
DMX/ STANDARD FINE/ LINEAR/ FLICKER MODE 1/ INTENSITY: 6
DMX/ PIXEL FINE/ LINEAR/ FLICKER MODE 1/ INTENSITY: 6
DMX/ STANDARD/ LOG/ FLICKER MODE 1/ INTENSITY: 4
DMX/ SUPER SIMPLE/ LOG/ FLICKER MODE 1/ INTENSITY: 4
DMX/ SIMPLE/ LOG/ FLICKER MODE 1/ INTENSITY: 4
DMX/ PIXEL/ LOG/ FLICKER MODE 1/ INTENSITY: 4
|
| P2E-3389 | In Standard Mode, DMX channel 16,17,18,19 support GLOW in pixels 3 and 4. They should only work on pixel 3. |
| P2E-8568 | device in master mode does not pass macro to device in slave mode. |
| P2E-1231 | Doesn't remember settings from Manual Control when power is turned off |
| P2E-7116 | After using the "Reset All to Default" option, it does not reset the macro settings |
| P2E-9746 | After selecting the appropriate mode, the DMX address range should change, for:
- Super Simple- DMX range should be from 1 to 501
- Simple- DMX range should be from 1 to 495
- Standard- DMX range should be from 1 to 475
- Standard Fine- DMX range should be from 1 to 444
- Pixel- DMX range should be from 1 to 476
- Pixel Fine- DMX range should be from 1 to 446.
Stopping the scrolling should be done when the maximum address appropriate for the MODE is reached. |