| S-4353 | error in message after W-DMX vaporization should be "SUCCESSFULL" |
| S-7312 | No stopping scrolling after reaching the maximum address or 1, transition should be after the second press of the button |
| S-8183 | G5 mode is missing from the W-DMX-> WDMX MODE menu. |
| S-4280 | After vaporizing the W-DMX and turning off the W-DMX- transmitter, the S-Tribe still shows the status "WDMX OK |
| S-8134-A/B | In Pixel Fine mode, on channel 92- increasing the value gradually from "0"-between the values 10-19 are enabled GLOW sources number 4 and 8. the strobe should be closed and at this point no source should be lit. |
| S-1273 | In Standard Fine and Pixel Fine mode with all sources on at 100%, the device reset itself |
| S-8367 | FLICKERING: DMX STANDARD/ LINEAR/ FLICKER MODE 1 INTENSITY: 6 DMX STANDARD FINE/ LINEAR/ FLICKER MODE 2/ INTENSITY: 6 DMX/ SUPER SIMPLE/ LINEAR/ FLICKER MODE 1/ INTENSITY: 6 DMX/ SIMPLE/ LINEAR/ FLICKER MODE 1 INTENSITY: 6 DMX/ PIXEL/ LINEAR/ FLICKER MODE 1/ INTENSITY: 6 DMX/ STANDARD FINE/ LINEAR/ FLICKER MODE 1/ INTENSITY: 6 DMX/ PIXEL FINE/ LINEAR/ FLICKER MODE 1/ INTENSITY: 6 DMX/ STANDARD/ LOG/ FLICKER MODE 1/ INTENSITY: 4 DMX/ SUPER SIMPLE/ LOG/ FLICKER MODE 1/ INTENSITY: 4 DMX/ SIMPLE/ LOG/ FLICKER MODE 1/ INTENSITY: 4 DMX/ PIXEL/ LOG/ FLICKER MODE 1/ INTENSITY: 4 |
| S-8247 | In Standard Fine and Pixel Fine modes, after DMX when all Halo Led and GLOW sources are above 80%- they start flashing randomly and the device resets(turns off and on). |
| S-4102 | "After selecting the appropriate mode, the DMX address range should change, for: - Super Simple- DMX range should be from 1 to 500 - Simple- DMX range should be from 1 to 496 - Standard- DMX range should be from 1 to 491 - Standard Fine- DMX range should be from 1 to 456 - Pixel- DMX range should be from 1 to 461 - Pixel Fine- DMX range should be from 1 to 416. Stopping the scrolling should be done when the maximum address appropriate for the MODE is reached." |
| S-6611 | You need to change the frequencies for: Flicker mode 1- is 4.8K, should be 2.4K |
| S-191 | With the orientation of the device in the "▼" position on the screen, the arrow should point to the current first pixel. In the picture I show the wrong pointing. It should be in the opposite direction |
| S-8195 | In Macro Manual from 41 to 50 remain at low Halo Led values. All Halo Led sources should glow according to the Macro intensity. |
| S-8328 | "Turning off the display light is inconsistent with the set time: - in the menu 10 seconds-actually 35 seconds - in the menu 30 seconds-actually 10 seconds - in the menu 60 seconds0actually 30 seconds -" |