I have a cracked display on my P1 retro.

I have a cracked display on my P1 retro.

  1. Contact your local distributor.
  2. Be sure to include a photo of your damaged screen in your message to identify the correct part.

    • Related Articles

    • User Manual [P1 retro lamp]

      WELCOME Dear User, Thank you for choosing Portman P1 retro™ – the original product with a registered design. We are proud to deliver you the highest quality, greatest design and real passion with our product. Each fixture in the Portman portfolio is ...

    • Programming CPU Board P-LPU1 with the STM32 Cube [P1 retro lamp, P2 hexaline, P3 PIX3L, P1 mini]

      You need: Programator STM 32 Core (you can order it by writing to support@portmanlights.com ) USB A- B MINI USB cable STM 32 Cube software (download here) Programming: After installing the STM 32 Cube, open the program Click on after "Erasing & ...

    • Loose pixel [P1 retro, P2 hexaline]

      Tools needed: Gloves Phillips screwdriver Steps: Place the device so that the pixels are facing upward Unscrew the thumbscrew and put down the pixel can cover Remove the filament (Hold the filament with a gloved hand only!). Tighten the screws ...

    • Firmware Update Manual [P1 Retro, P2 Hexaline, P3 PIX3L]

      To update luminaire you need: Laptop or PC with MS Windows DMX wires USB – DMX FTDI adaptor (compatible with enttec open dmx, available from Your local Portman Lights distributor) Latest software Portman Flasher Steps: Download firmware files in .zip ...

    • Replacing the power switch [P1 retro, P2 hexaline]

      Tools needed: Phillips screwdriver hex bit up to 2.5mm Switch Rocker (write to your local distributor) Steps: Arrange the device with the pixels facing downward Using a 2.5mm hex bit, unscrew the electronics cover Open the electronics cover, rotate ...