Related Articles
User Manual [MANTIS]
WELCOME Dear User, Thank you for choosing Portman MANTIS™ – the original product with a registered design. We are proud to deliver you the highest quality, greatest design and real passion with our product. Each fixture in the Portman portfolio is ...
DMX CHART [MANTIS]
Pixels order DMX Modes Mode Simple DMX channel Parameter Descripton 1. Intensity Main Source Ch. 1 Pixel 1 HaloLED 8 bit dimmer 0 – 100% 2. Intensity Main Source Ch. 2 Pixel 2 HaloLED 8 bit dimmer 0 – 100% 3. Intensity Main Source Ch. 3 Pixel 3 ...
W-DMX installation [MANTIS, S-TRIBE, P1 EVO, P2 EVO, P3 EVO, EVO ELEMENT, AMULET]
Check if you have all parts required for installation. Portman W-DMX KIT contains : Antena W-DMX PCB Connecting wire 2 x M2,5 Screw with countersunk head (black) 2 x M2,5 Washer 2 x M2,5 Nut Proper for installation: You need Electronics Box Cover ...
Firmware Update Manual [MANTIS, S-TRIBE, P1 EVO, P2 EVO, P3 EVO, EVO ELEMENT, AMULET]
To update You need: DMX wires Portman Updater Box (contact your local distributor) Latest software Steps: Download firmware Copy the unzipped .rud files to the SD card to AL-RDM folder. (If you have downloaded the whole AL-RDM folder please just copy ...
I can’t control the Mantis via DMX, LED sources light up on still.
If your Mantis does not respond to DMX control, and its sources are still lit up then most likely you just need to update it to the correct software version. Check what number appears on your LDB2 board ( inside the device) , If your board is marked: ...