Libraries [P1 retro lamp]

• Related Articles

• User Manual [P1 retro lamp]

  WELCOME Dear User, Thank you for choosing Portman P1 retro™ – the original product with a registered design. We are proud to deliver you the highest quality, greatest design and real passion with our product. Each fixture in the Portman portfolio is ...

• Programming CPU Board P-LPU1 with the STM32 Cube [P1 retro lamp, P2 hexaline, P3 PIX3L, P1 mini]

  You need: Programator STM 32 Core (you can order it by writing to support@portmanlights.com ) USB A- B MINI USB cable STM 32 Cube software (download here) Programming: After installing the STM 32 Cube, open the program Click on after "Erasing & ...

• Reflector replacement [P1 retro lamp, P2 hexaline]

  Tools needed for replacement: Safety glasses Socket wrench 7 mm (9/32 inch) Material glove Exchange process: Please unscrew the thumbscrew holding the front cover. Please remove the front cover and put it gently on the side remembering the safety ...

• Loose pixel [P1 retro, P2 hexaline]

  Tools needed: Gloves Phillips screwdriver Steps: Place the device so that the pixels are facing upward Unscrew the thumbscrew and put down the pixel can cover Remove the filament (Hold the filament with a gloved hand only!). Tighten the screws ...

• Firmware Update Manual [P1 Retro, P2 Hexaline, P3 PIX3L]

  To update luminaire you need: Laptop or PC with MS Windows DMX wires USB – DMX FTDI adaptor (compatible with enttec open dmx, available from Your local Portman Lights distributor) Latest software Portman Flasher Steps: Download firmware files in .zip ...