Loose electronics box [P2 hexaline]

• Related Articles

• Loose electronics box [P2 hexaline]

  Tools needed: Philips screwdriver 3 Philips screwdriver 1,5 Torx Key 3 Torx Key 2,5 Service steps: Place P2 hexaline pixels facing downward Remove the 4 screws holding the electronics box cover with Torx key 3 Remove the electronics cover and ...

• User Manual [P2 hexaline]

  WELCOME Dear User, Thank you for choosing Portman P2 hexaline™ – the original product with a registered design. We are proud to deliver you the highest quality, greatest design and real passion with our product. Each fixture in the Portman portfolio ...

• Loose pixel box [P1 retro, P2 Hexaline]

  In this article you will find instructions for tightening the pixel box in P1 retro and P2 hexaline.

• Loose pixel [P1 retro, P2 hexaline]

  Tools needed: Gloves Phillips screwdriver Steps: Place the device so that the pixels are facing upward Unscrew the thumbscrew and put down the pixel can cover Remove the filament (Hold the filament with a gloved hand only!). Tighten the screws ...

• Main Hinge Repair [P2 hexaline]

  Tools needed: Wrench 17 Torque wrench with socket 17, set to power 29Nm Precision Phillips screwdriver Imbus 3mm Torx T4 Flathead screwdriver narrow Socket wrench 10 Gloves Steps: Place the device so that the electronics box is facing down Unscrew ...