RGBW source displays a different colour than it should

• Related Articles

• I have different macros in one type of device.

  Check the device menu to make sure each device has the same software version Update all your devices to the latest software version

• Change Log [EVO ELEMENT]

  We have recently fixed: EE-2846 Incorrectly displayed number of hours of operation of the device. We are working on: EE-7342 In Slave Mode, with DMX INPUT W-DMX and unpaired W-DMX- it displays incorrectly. It should read "NO WDMX" EE-2918 In the ...

• DMX CHART [EVO ELEMENT]

  PIXEL ORDER DMX MODES Mode Super Simple DMX CH Parameter Description 1) Intensity Main Source Ch.1 Pixel 1 HaloLED 8 bit dimmer 0 – 100% 2) Intensity Main Source Ch.2 Pixel 2 HaloLED 8 bit dimmer 0 – 100% 3) Intensity Main Source Ch.3 Pixel 3 HaloLED ...

• DMX CHART [P3 EVO]

  PIXEL ORDER DMX MODES Mode Super Simple DMX channel Parameter Description 1. Intensity Main Source Ch.1 Pixel 1 HaloLED 8 bit dimmer 0 – 100% 2. Intensity Main Source Ch.2 Pixel 2 HaloLED 8 bit dimmer 0 – 100% 3. Intensity Main Source Ch.3 Pixel 3 ...

• PCB Filament 1800K 3W KIT replacement [P1 mini]

  Open front cover and remove the old LED filament. Remove the rubber band if installed. Unscrew RGBW bracket – 2 screws Pick up the RGBW bracket. Pay attention to the black cable. It might be mounted under the reflector Remove the reflector Cut the ...