Sources in P1mini slowly fading despite curve change

Sources in P1mini slowly fading despite curve change

If, despite changing the curve in your P1 mini menu, the main sources are still fading too slowly:
  1. Contact your local distributor for a Portman AVT programmer,
  2. Download the latest software
  3. Update your P1 mini to the latest software according to the intructions.

    • Related Articles

    • User Manual [P1 mini]

      WELCOME Dear User, Thank you for choosing Portman P1 mini™ – the original product with a registered design. We are proud to deliver you the highest quality, greatest design and real passion with our product. Each fixture in the Portman portfolio is ...

    • PCB Filament 1800K 3W KIT replacement [P1 mini]

      Open front cover and remove the old LED filament. Remove the rubber band if installed. Unscrew RGBW bracket – 2 screws Pick up the RGBW bracket. Pay attention to the black cable. It might be mounted under the reflector Remove the reflector Cut the ...

    • Change Log [P1 EVO]

      We have recently fixed: P1E-358 Buttons when DMX connected and screen blanked out glow blue and should glow white P1E-7531 Doesn't memorize "Macro Speed" When the power is turned off and on, "Macro Speed" changes to "001%" and it should be the ...

    • User Manual [P2 EVO]

      WELCOME Dear User, Thank you for choosing Portman P2 EVO™ – the original product with a registered design. We are proud to deliver you the highest quality, greatest design and real passion with our product. Each fixture in the Portman portfolio is ...

    • W-DMX installation [P1 retro, P2 hexaline, P3 PIX3L, P1 mini]

      Check if you have all parts required for installation. Portman W-DMX KIT contains : Antena W-DMX PCB Connecting wire 2 x M2,5 Screw with countersunk head (black) 2 x M2,5 Washer 2 x M2,5 Nut 2 x M4 Toothed washer 1 x M4 Nut 1 x Plastic Cap (black) ...