I have a faulty power switch on P2 hexaline.

I have a faulty power switch on P2 hexaline.

If your power button has been damaged:
Buy a new Switch Rocker through your local distributor.
Replace the power button on your P2 hexaline according to these instructions.

    • Related Articles

    • Replacing the power switch [P1 retro, P2 hexaline]

      Tools needed: Phillips screwdriver hex bit up to 2.5mm Switch Rocker (write to your local distributor) Steps: Arrange the device with the pixels facing downward Using a 2.5mm hex bit, unscrew the electronics cover Open the electronics cover, rotate ...

    • User Manual [P2 hexaline]

      WELCOME Dear User, Thank you for choosing Portman P2 hexaline™ – the original product with a registered design. We are proud to deliver you the highest quality, greatest design and real passion with our product. Each fixture in the Portman portfolio ...

    • Main Hinge Repair [P2 hexaline]

      Tools needed: Wrench 17 Torque wrench with socket 17, set to power 29Nm Precision Phillips screwdriver Imbus 3mm Torx T4 Flathead screwdriver narrow Socket wrench 10 Gloves Steps: Place the device so that the electronics box is facing down Unscrew ...

    • Firmware Update Manual [P1 Retro, P2 Hexaline, P3 PIX3L]

      To update luminaire you need: Laptop or PC with MS Windows DMX wires USB – DMX FTDI adaptor (compatible with enttec open dmx, available from Your local Portman Lights distributor) Latest software Portman Flasher Steps: Download firmware files in .zip ...

    • User Manual [P2 EVO]

      WELCOME Dear User, Thank you for choosing Portman P2 EVO™ – the original product with a registered design. We are proud to deliver you the highest quality, greatest design and real passion with our product. Each fixture in the Portman portfolio is ...