Loose pixel box [P1 retro, P2 Hexaline]

• Related Articles

• Loose pixel [P1 retro, P2 hexaline]

  Tools needed: Gloves Phillips screwdriver Steps: Place the device so that the pixels are facing upward Unscrew the thumbscrew and put down the pixel can cover Remove the filament (Hold the filament with a gloved hand only!). Tighten the screws ...

• Loose electronics box [P2 hexaline]

  In this article you will find instructions on how to tighten your electronics box.

• User Manual [P2 hexaline]

  WELCOME Dear User, Thank you for choosing Portman P2 hexaline™ – the original product with a registered design. We are proud to deliver you the highest quality, greatest design and real passion with our product. Each fixture in the Portman portfolio ...

• Firmware Update Manual [P1 Retro, P2 Hexaline, P3 PIX3L]

  To update luminaire you need: Laptop or PC with MS Windows DMX wires USB – DMX FTDI adaptor (compatible with enttec open dmx, available from Your local Portman Lights distributor) Latest software Portman Flasher Steps: Download firmware files in .zip ...

• Loose electronics box [P2 hexaline]

  Tools needed: Philips screwdriver 3 Philips screwdriver 1,5 Torx Key 3 Torx Key 2,5 Service steps: Place P2 hexaline pixels facing downward Remove the 4 screws holding the electronics box cover with Torx key 3 Remove the electronics cover and ...