Sources in P1mini not working/blinking
Service action:
If you have in your P1 mini main sources in a glass tube (photo below)- .... they are the cause of the blinking.
We are currently conducting a service campaign of replacement with new sources that are equivalent to the previous ones (free of defects).
Contact your local Distributor.
Write how many P1 mini's you own in which you would like to replace the sources.
You will receive new sources completely free of charge.
Here you will find instructions for replacing the filaments with new ones.
Related Articles
User Manual [P1 mini]
WELCOME Dear User, Thank you for choosing Portman P1 mini™ – the original product with a registered design. We are proud to deliver you the highest quality, greatest design and real passion with our product. Each fixture in the Portman portfolio is ...Macro not working in P1 mini
If Macro not working in P1 mini: Contact your local distributor for a Portman AVT programmer, Download the latest software Update your P1 mini to the latest software according to the intructions.PCB Filament 1800K 3W KIT replacement [P1 mini]
Open front cover and remove the old LED filament. Remove the rubber band if installed. Unscrew RGBW bracket – 2 screws Pick up the RGBW bracket. Pay attention to the black cable. It might be mounted under the reflector Remove the reflector Cut the ...Programming CPU Board P-LPU1 with the STM32 Cube [P1 retro lamp, P2 hexaline, P3 PIX3L, P1 mini]
You need: Programator STM 32 Core (you can order it by writing to support@portmanlights.com ) USB A- B MINI USB cable STM 32 Cube software (download here) Programming: After installing the STM 32 Cube, open the program Click on after "Erasing & ...DMX CHART [P1 mini]
PIXEL ORDER DMX MODES Mode Simple DMX channel Parameter Descripton 1. Dimmer Main Source Ch. 1 Pixel 1 filament 8 bit dimmer 0 – 100% 2. Dimmer Main Source Ch. 2 Pixel 2 filament 8 bit dimmer 0 – 100% 3. Dimmer Main Source Ch. 3 Pixel 3 filament 8 ...