P1 retro, P2 hexaline
Reflector replacement [P1 retro lamp, P2 hexaline]
Tools needed for replacement: Safety glasses Socket wrench 7 mm (9/32 inch) Material glove Exchange process: Please unscrew the thumbscrew holding the front cover. Please remove the front cover and put it gently on the side remembering the safety ...
Loose pixel [P1 retro, P2 hexaline]
Tools needed: Gloves Phillips screwdriver Steps: Place the device so that the pixels are facing upward Unscrew the thumbscrew and put down the pixel can cover Remove the filament (Hold the filament with a gloved hand only!). Tighten the screws ...
Replacing the power switch [P1 retro, P2 hexaline]
Tools needed: Phillips screwdriver hex bit up to 2.5mm Switch Rocker (write to your local distributor) Steps: Arrange the device with the pixels facing downward Using a 2.5mm hex bit, unscrew the electronics cover Open the electronics cover, rotate ...