ALL
Compatibility LDB2 with Firmware [Mantis]
MBI 5040- V 1.44 MBI 5030- V 1.48
Programming CPU Board P-LPU1 with the STM32 Cube [P1 retro lamp, P2 hexaline, P3 PIX3L, P1 mini]
You need: Programator STM 32 Core (you can order it by writing to support@portmanlights.com ) USB A- B MINI USB cable STM 32 Cube software (download here) Programming: After installing the STM 32 Cube, open the program Click on after "Erasing & ...
Change Log [P3 EVO]
Recent problems solved: P3E-5791 “In Standard Fine and Pixel Fine modes, when the dimmer from the DMX console is set to 0, the HaloLED should not light up:” We are working on: P3E-1125 error in message after W-DMX vaporization should be "SUCCESSFULL" ...
Change Log [P1 EVO]
We have recently fixed: P1E-358 Buttons when DMX connected and screen blanked out glow blue and should glow white P1E-7531 Doesn't memorize "Macro Speed" When the power is turned off and on, "Macro Speed" changes to "001%" and it should be the ...
Change Log [AMULET]
We have recently fixed: A-35548 When Amulet is turned off and on from the power supply- the device should remember the last Manual combination for main source, glow and macro. Currently, these settings reset themselves. A-65000 Turning off the ...
Change Log [EVO ELEMENT]
We have recently fixed: EE-2846 Incorrectly displayed number of hours of operation of the device. We are working on: EE-7342 In Slave Mode, with DMX INPUT W-DMX and unpaired W-DMX- it displays incorrectly. It should read "NO WDMX" EE-2918 In the ...
Change Log [P2 EVO]
We have recently fixed: P2E-5365 error in message after W-DMX vaporization should be "SUCCESSFULL" P2E-2968 The second P2 EVO in Slave mode does not receive the signal from the first one in Master mode when Macro is triggered. P2E-126 No stopping ...
Change Log [S-TRIBE]
We have recently fixed: S-4353 error in message after W-DMX vaporization should be "SUCCESSFULL" S-7312 No stopping scrolling after reaching the maximum address or 1, transition should be after the second press of the button S-8183 G5 mode is missing ...
Change Log [Mantis]
We have recently fixed: M-1332 Changing the components on the LDB2 board. Depending on the board, it is required to upload to the LPU2 the appropriate firmware version We are working on: M-7735 Fixed the display of yellow color in the central source. ...
Current Firmware
Luminaires Firmware Manual Main Revisions Comments P1 retro lamp V 212 (⇩) update manual P2 hexaline V 212 (⇩) update manual P3 PIX3L V 212 (⇩) update manual P1 mini LPU- 223, LDB-231, MACRO 14052020 (⇩) update manual MANTIS MBI5030 V 1.48/ MBI5040 V ...